Forklift & MHE Repair Service

Mechanical · Electrical · Body & Paint.

Millennium Power (MPOM) provides complete forklift and material handling equipment maintenance, repair, and body & paint refurbishment for warehouses, industrial facilities, ports, and logistics operators across Dammam and the Eastern Province.

Our workshop in Al-Sinaiyah, Dammam handles the three service disciplines that keep a forklift fleet running — mechanical repair, electrical and control-system diagnostics, and body repair, paint, and cab refurbishment — under one roof, with one accountable team.

Every forklift, reach truck, pallet stacker, or order picker that enters our workshop is diagnosed before it is repaired. Using Jaltest and Nexiq diagnostic platforms plus manufacturer-specific tools for Curtis, Zapi, and Sevcon controllers, our technicians identify the actual cause of a fault instead of replacing parts by trial and error. You receive an itemized quotation before any work begins. You approve the scope; then we execute it.

Whether you are bringing in a single forklift for a hydraulic fault or managing a warehouse fleet that needs a structured maintenance program, the standard is the same: proper diagnosis, genuine or OEM-approved parts, documented workmanship, & a written service report of what was done & why.

Got an Emergency? We’re here to help!

If you need urgent Forklift breakdown support, contact us immediately and our emergency team will respond right away!

Call Now OR Whatsapp Now

Mechanical Services

We offer complete mechanical repair for forklifts and material handling equipment:

Diesel engine work (Yanmar, Kubota, Isuzu, Nissan, Perkins) from cylinder head servicing to full engine rebuilds, and LPG engine service including fuel system inspection.

Powershift, torque converter, and hydrostatic transmission repair, drive axle service, and differential inspection.

Lift and tilt cylinders, hydraulic pump service, control valve repair, hose replacement, and full hydraulic system diagnosis. This is where most forklift downtime originates — and where our test equipment gives us a clear advantage.

Mast chain replacement, roller bearing service, lift chain adjustment, load backrest repair, and fork straightening or replacement to safety standard.

Drum and wet-disc brake service, parking brake adjustment, and hydraulic brake line repair.

Radiator repair, water pump replacement, thermostat service, and cabin AC repair for enclosed cab forklifts — critical in Eastern Province summer conditions where cab temperatures directly affect operator safety.

Power steering repair, tie rod and ball joint replacement, and tire service for cushion, solid rubber, and pneumatic types.

Oil and filter service, hydraulic fluid change, transmission fluid service, and scheduled inspection by operating hour intervals — for a single forklift or across an entire fleet on a planned calendar.

Got an Emergency? We’re here to help!

If you need urgent forklift breakdown support, contact us immediately and our emergency team will respond right away.

Call Now OR Whatsapp Now

Body Repair, Paint & Cab Refurbishment

Forklifts take structural & cosmetic damage differently than road vehicles - impact from loads, tipovers, mast collisions, and constant abrasion against pallets & shelving. Our body & paint department is equipped for industrial repair to a documented standard:

Structural body repair

Overhead guard (roll cage) repair after impact, chassis welding, & structural straightening after tipover. All structural welds inspected before the forklift returns to service.

Mast & carriage refurbishment

Mast section repainting, load backrest repair, & fork carriage restoration. Structural components sandblasted, primed, & finished to industrial specification.

Cab refurbishment

For enclosed-cab forklifts, reach trucks, & container handlers: cab straightening, glass replacement, seat refurbishment, & interior repaint.

Full repaint in company livery

Complete forklift repaint with computerized color matching to your corporate colors, logo application, & safety marking. Ideal when a warehouse operator wins a new contract or refreshes fleet branding.

Corrosion treatment

Rust removal and protective coating for forklifts operating in coastal, cold storage, or chemically active environments common in Eastern Province port and industrial facilities.

For fleet operators, forklift condition affects both safety compliance and warehouse image. We offer scheduled batch body-and-paint programs so damaged forklifts are cycled through refurbishment without taking your material handling capacity off the floor all at once.

Electrical & Computer Diagnostic Services

Modern forklift faults are electronic more often than mechanical, & electric forklifts are entirely electronic systems on wheels. Our electrical department is built for that reality:

Computer diagnostics — full-system fault code reading & live data analysis using Jaltest, Nexiq, & manufacturer tools, covering engine, transmission, hydraulic, & safety systems.
Controller diagnosis and programming — Curtis, Zapi, Sevcon, & OEM-integrated traction & pump controllers. We read fault codes, adjust parameters, & reprogram control units when required.
Traction & pump motor repair — DC & AC motor overhaul, brush replacement, bearing service, & armature testing for electric forklifts.
Battery & charger service — lead-acid battery testing & reconditioning, lithium-ion battery diagnostics, & charger fault analysis. We identify whether the fault is the battery, the charger, or the truck.
Wiring, sensor, & contactor repair — harness damage, seat switch faults, lift height sensors, tilt sensors, & contactor replacement.
Instrumentation & display units — dashboard fault diagnosis, hour meter service, & display module replacement.

If your forklift has a warning light no one has been able to explain, keeps entering fault mode intermittently, or a controller flashes an error nobody can decode — this is the type of problem our diagnostic capability exists to close permanently.

Book a diagnostic inspection or request a forklift maintenance proposal today!

Call Now OR Whatsapp Now

Fleet Maintenance for Eastern Province Companies

If you manage company cars, sales vehicles, service vans, or a mixed light-commercial fleet, ad-hoc repairs at whichever workshop is nearest is the most expensive way to maintain it. MPOM offers structured fleet maintenance contracts built for how Saudi companies actually operate:

Scheduled preventive maintenance by kilometers or calendar, planned around your operating hours so vehicles are serviced when they are least needed on the road

Priority turnaround — contract fleet vehicles move to the front of the workshop queue

One accountable supplier for mechanical, electrical, & body work — no coordinating three vendors & three invoices per incident

Itemized reporting — every vehicle gets a written service report; your procurement & finance teams get clean documentation for every riyal spent

Per-vehicle history — we maintain the service record of each car in your fleet, which protects resale value & exposes vehicles that are costing more than they should

Request a Fleet Service Quote Now

Our Expert Technicians

At Millennium Power, our technicians are trained across the three disciplines a complete forklift service requires — mechanical repair, controller and auto-electrical diagnostics, and body & paint refurbishment. The team works to written procedures: every fault is diagnosed with instrumentation before parts are ordered, every repair is quoted before it begins, and every completed job is documented in a service report.

Based in Al-Sinaiyah, Dammam, the team supports individual operators who need a fault fixed properly the first time, and fleet clients across the Eastern Province who need consistent, accountable maintenance across dozens of units. From a single diagnostic visit to a full annual fleet program, the working standard does not change: find the real cause, fix it permanently, and put it in writing.

Our Capability Edge

Three things differentiate MPOM in the Eastern Province forklift and MHE maintenance market:

Our Jaltest and Nexiq platforms, combined with controller-specific tools for Curtis, Zapi, and Sevcon, were purchased for heavy trucks, industrial diesel engines, and generators — which means the same investment covers forklifts and material handling equipment with capability to spare. Intermittent electrical and hydraulic faults that defeat conventional workshops are our normal workload.
Mechanical, electrical, and body & paint operate under one roof and one job card. For a warehouse operator, that collapses three supplier relationships into one contract, one contact, and one report per unit. For a facility manager, it means a forklift that needs hydraulic repair, controller reprogramming, and structural welding after a tipover is finished by one team — not passed between three.
MPOM maintains generators for facilities that cannot lose power & trucks for companies that cannot lose haulage days. That same procedure-driven culture - diagnosis before repair, quotation before work, documentation after completion - is how we service every car & every fleet, because it is the only way we work.

Frequently Asked Questions

MPOM provides complete forklift and MHE service across three departments: mechanical (engine, transmission, hydraulic, mast, brakes, cooling), electrical (controller diagnostics, motor repair, battery and charger service, wiring), and body repair & painting (structural welding, overhead guard repair, cab refurbishment, full repaint in company livery). All three operate in one workshop in Al-Sinaiyah, Dammam, with on-site dispatch available for fleet clients across the Eastern Province.

We service major forklift, reach truck, and MHE brands including Toyota, Komatsu, Hyster, Yale, Linde, Crown, JCB, Doosan, Hitachi, CAT, Logisnext, TCM, and Nichiyu. Our Jaltest, Nexiq, and controller-specific diagnostic platforms cover the systems used across Japanese, Korean, European, American, and Chinese equipment, so diagnostic capability is not limited to specific makes.

Yes. Our team is equipped for both combustion forklifts (diesel and LPG engine service, fuel system diagnosis, exhaust systems) and battery-electric forklifts (DC and AC traction motor repair, controller programming, lead-acid and lithium-ion battery service, and charger diagnostics). We can also advise on transitioning from combustion to electric equipment where operationally suitable.

Forklift body work covers structural repair (overhead guard, chassis, mast section straightening), cab refurbishment for enclosed forklifts (welding, glass replacement, interior repaint), and full repaint programs in company colors with logo application. Structural welding is inspected before the equipment returns to service. For fleet operators, batch refurbishment programs cycle multiple units through repair without taking your entire material handling capacity off the floor at once.

Yes — fleet maintenance is a core part of our workshop. We service warehouse, distribution center, factory, port, and logistics fleets under structured contracts with scheduled servicing by operating hours or calendar, priority workshop turnaround, on-site dispatch when required, and itemized reporting per unit. Mechanical, electrical, and body & paint work are all covered under the same contract, so one supplier is accountable for the whole forklift. Contact us with your fleet size and equipment types for a tailored proposal.

Yes. For fleet clients and equipment that cannot easily be transported to the workshop — heavy container handlers, warehouse-installed reach trucks, port terminal equipment — we dispatch mobile service across Dammam, Khobar, Dhahran, Jubail, and Al-Ahsa. On-site diagnostic visits, preventive maintenance service, and many repairs can be completed at your facility. More extensive work returns to the workshop for correct execution.

Every forklift is connected to our diagnostic platforms for full-system fault reading and live data analysis before any repair is quoted. For controller and traction system faults, we use manufacturer-specific tools (Curtis, Zapi, Sevcon, plus OEM interfaces) to read parameters and re-program where required. For hydraulic faults, we use pressure and flow test equipment to identify whether the issue is the pump, control valve, cylinder, or hose. This approach identifies the failed component instead of the visible symptom — so you pay to fix the cause once, instead of replacing parts one by one.

Every job is priced from a diagnostic inspection and confirmed with an itemized quotation before work begins — you approve the exact scope and cost in advance. Preventive maintenance is priced by service level and forklift capacity; repair work is priced by diagnosed scope. Fleet contract clients receive agreed rate schedules with volume-based terms. For a precise quote, call or WhatsApp +966 55 287 7783 with your forklift model, capacity, and either the fault description or your fleet details.